[TR] TR3 Fuel Pump

[Randall]

> btw - some years ago I saw a socket wrench that didn't click 
> - it was a 
> continuous thing so you turn just a little tiny bit then back 
> up and repeat. 
> it was about $100, but it's a tool I still lust after.  has 
> anyone seen that 
> around anywhere?

I think they've been mostly pulled off the market. MATCO and MAC both used to sell them I believe, but not now.  Too weak, prone to
slip, etc.  The extra-fine tooth ratchets have pretty much taken over AFAIK.

Here's one, though
http://tinyurl.com/k8abjy9

For really tight quarters where a socket is needed, I use one of these adapters along with an original GearWrench
http://tinyurl.com/kvyj8fg

For those who may not know, the GearWrench still clicks, but the clicks are only about 4 degrees apart.  So you only have to swing
the handle a little bit to turn the nut or bolt.
http://www.gearwrench.com/wrenches/ratcheting/gearwrenchr-original/gearwrench-9014-7-16-combination-ratcheting-wrench.html

-- Randall