[TR] TR-3 rear brake cylinder

[Jonas Payne]

There are actually 2 or 3 thin pieces to this assy.  If you look closely,
there are some tabs that interlock the pieces together.  You need to get a
screwdriver between the shims to clear the tabs.  

One piece goes in from the right and the other from the left of the cyl.

 If they are in rough shape and need to be replaced anyway, you can pound
the tabs flat with a punch and hammer.

Jonas Payne
PBR Consulting Services, LLC
702.882.6711

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of JOSEPH
MATO
Sent: Sunday, September 28, 2014 4:44 PM
To: triumphs at autox.team.net
Subject: [TR] TR-3 rear brake cylinder

I have been trying to remove the rear cylinder and its being held in by a
plate that slides up and down with it. It doesn't seem to come free, Does
anyone have any ideas?  thanks, Joe

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jpaynepbr@cox.net