[TR] TR4 radiator shrouds

[Brad Kahler]

Keith,

It took me a little time to recognize the actual radiator shroud due to the
high polish and the reflections of the red body paint!

Definitely nice looking although it might look a little bit out of place on
my clapped out white TR4 :)

Thanks!

Brad


On Wed, Sep 24, 2014 at 8:08 PM, Keith Stewart <keithstewart at execulink.com>
wrote:

> On Sep 24, 2014, at 1:09 PM, bkahler1 at gmail.com wrote:
>
>
> Ed,
>
> I attached a picture of one of the cars I took a picture of on the show
> field.  You can see the gap at the side of the radiator where the shroud is
> wider than the radiator itself allowing airflow around the sides of the
> radiator.
>
> I have not seen Richard Goods TR4 shroud on a car, only the pictures on his
> website.  From the website pictures the shroud appears to be the same width
> as the factory (and aftermarket) shrouds.  Supposedly the TR4 and TR4A
> shrouds are the same, at least according to Moss's catalog.
>
> Could you send me a picture or two of your shroud installation?
>
> Thanks,
>
> Brad
>
> I just installed the Richard Good TR4 Polished Stainless Shroud. It is a
> high quality product and fits perfectly. The finish is mirror-like -
> amazing. You cannot really see the polished surface in the photos because
> the mirror finish reflects the under hood paint just like a mirror. The top
> of the shroud lines up with the top of the rad fins. The sides are just
> slightly wider that the sides of the rad.
>
> NOTE: The photos will not appear on the list copy but are included in the
> copy to Brad.
>
> Keith Stewart
> keithstewartATexeculinkDOTcom