[TR] TR4 radiator shrouds

[Keith Stewart]

On Sep 24, 2014, at 1:09 PM, bkahler1 at gmail.com wrote:

>
> Ed,
>
> I attached a picture of one of the cars I took a picture of on the show
> field.  You can see the gap at the side of the radiator where the shroud is
> wider than the radiator itself allowing airflow around the sides of the
> radiator.
>
> I have not seen Richard Goods TR4 shroud on a car, only the pictures on his
> website.  From the website pictures the shroud appears to be the same width
> as the factory (and aftermarket) shrouds.  Supposedly the TR4 and TR4A
> shrouds are the same, at least according to Moss's catalog.
>
> Could you send me a picture or two of your shroud installation?
>
> Thanks,
>
> Brad
I just installed the Richard Good TR4 Polished Stainless Shroud. It is a high
quality product and fits perfectly. The finish is mirror-like - amazing. You
cannot really see the polished surface in the photos because the mirror finish
reflects the under hood paint just like a mirror. The top of the shroud lines
up with the top of the rad fins. The sides are just slightly wider that the
sides of the rad.

NOTE: The photos will not appear on the list copy but are included in the copy
to Brad.

Keith Stewart
keithstewartATexeculinkDOTcom