[TR] TR-3 back brake bleeder screw removal(without breaking)

[Geo Hahn]

Some penetrant (like PBlaster) might be helpful.  I use a six point socket
for the initial loosening if I am expecting trouble.

A mini-impact working of the wrench (as opposed to a heavy-handed turning)
can have better results.

Going forward, I think keeping rubber caps on the bleeders reduces the
chance of future problems.

Geo

On Tue, Sep 16, 2014 at 2:30 AM, JOSEPH MATO <joemato at sbcglobal.net> wrote:

> I remember using a small torch to heat the screw up slightly red hot, then
> using a long wrench about 11 mm. Any other methods?
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com