[TR] removing a broken bolt

[Keith Stewart]

> On Nov 25, 2014, at 7:05 PM,<brianharlan at scrtc.com
<mailto:brianharlan at scrtc.com>>t wrote:
>
> Then use
> an appropriate sized flat head screwdriver to turn it out. if you can't
> turn it with a regular screwdriver, try one of the screwdriver tips that
> can be used with a ratchet.Use this method in conjunction with the other
> suggestions of wax, heating, cooling, etc.
b& or, you can check with your FLAPS for an impact driver. Basically, a unit
like a chisel with a screwdriver tip that when struck with a hammer, turns the
tip and simultaneously delivers an impact to the head.

Keith Stewart
keithstewartATexeculinkDOTcom