[TR] removing a broken bolt

Randall TR3driver at ca.rr.com
Tue Nov 25 10:16:55 MST 2014


> Carefully ratcheted the timing cover pedestal into the block 
> when at "snug" the head twisted off.

If this is a TR3A, the pedestal screws into the front plate, not the block.  They are staked into place originally, so the threads
may have been damaged by removing it.

Best route is probably to remove the plate, then drill & tap for a Helicoil.  Or, I believe Joe A. still sells new plates.

-- Randall  


More information about the Triumphs mailing list