[TR] Speedometer Cable
Geo Hahn
ahwahneetr at gmail.com
Thu Nov 6 06:29:12 MST 2014
On Wed, Nov 5, 2014 at 6:45 PM, Randall <tr3driver at ca.rr.com> wrote:
>
> Check how much the end of the cable protrudes out of the housing (not the
> nut) with the inner cable pushed in as far as it will go. It should be no
> more than 3/8". If more, you need to trim it.
>
I'll add - when I cut a speedo cable I use an angle grinder -- never a
hacksaw or such -- you want to preserve the wrap of the individual wires.
For just a small adjustment you could probably just dress the end on a
grinder but take it slow.
Geo
More information about the Triumphs
mailing list