[TR] TR6 Gearbox - Countershaft bearings

[Mark J Bradakis]

Jeff Scarbrough wrote:
> I've got my gearbox completely disassembled (and carefully arranged so
> I can reassemble it)...
>
> ...except for the small bearings inside the countershaft 1st/reverse
> piece.  These bearings are held in with a little clip that's oddly
> made - the ends are cut on a bias, so that you can hook a screwdriver
> or tool under one end, but the other end is cut the other way, so
> almost nothing can grab a hold of it.

As I recall I use two small screwdrivers.  One is placed along the end of the clip
that slopes down, so to speak, the other is placed so that you can pry under the
other end while pushing against the first screwdriver.  Hard to explain in text,
a picture would be nice, but don't have one.

mjb.