[TR] TR6 Gearbox - Countershaft bearings
Jeff Scarbrough
fishplate at gmail.com
Sat Mar 22 14:22:56 MDT 2014
I've got my gearbox completely disassembled (and carefully arranged so
I can reassemble it)...
...except for the small bearings inside the countershaft 1st/reverse
piece. These bearings are held in with a little clip that's oddly
made - the ends are cut on a bias, so that you can hook a screwdriver
or tool under one end, but the other end is cut the other way, so
almost nothing can grab a hold of it.
Anyone got a trick for removing these clips?
Jeff Scarbrough
Corrosion Acres, Ga.
More information about the Triumphs
mailing list