[TR] Tr4 Leaf springs

[Lee&John Howard]

Don - The specs at the bottom of the ad say .022mm. That should be good,
shouldn't it?

Thank you, and TeriAnn, Randall, and Andrew, for your responses.

I will stay with my springs if they check out OK after disassembly. Maybe
there's a test somewhere that i can apply, although standing on them
inverted on the concrete sounds like fun.

John


On Fri, Mar 7, 2014 at 3:35 PM, Don Hiscock <don.hiscock at gmail.com> wrote:

> "CS Hyde UHMW - PE with High Bond Adhesive Liner, 20mm Thick, Tan, 2" Width
> x 5 Yard Roll"
>
> Twenty millimeters!  Sumthin' gotta be wrong there, dontcha think?
>
>
> On Fri, Mar 7, 2014 at 5:31 PM, Randall <tr3driver at ca.rr.com> wrote:
>
> >
> > ---- Don Hiscock <don.hiscock at gmail.com> wrote:
> > > McMaster-Carr offer a range of thicknesses in UHMWPE adhesive-backed
> > films.
> > >  Any of these likely to work, Randall?
> > > http://www.mcmaster.com/#uhmw-polyethylene-film/=qzu4q9
> >
> > I got mine from MMC, but they don't seem to offer what I got any more.
> >  IMO it would be better to look for a product that already comes in the
> > right width (2" IIRC) and with a good, outdoor grade adhesive applied.
>  So
> > this might be a better choice:
> > http://goo.gl/hpK1LL
> >
> > Randall
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/leejohn7@gmail.com