[TR] Slow Fast Slow Fast

[Randall]

> Just checked the rotor 
> runout and it's
> way out of spec on the right and OK (.005) on the left.
> 
> Should I turn both rotors?

IMO, replace the right, leave the left alone except for breaking the glaze.  If the right rotor warped that badly, then it's almost
certainly a bad casting and will just warp again.

>  They aren't scored; if I turn 
> them must I put in
> new pads?

Should be OK to reuse the old pads, if they look alright.  But since they normally wear out first, changing them now may mean longer
before you change them again.  Kind of depends on what your time is worth to change them.

Randall