[TR] TR4 seat mounting question

[Dean Tetterton]

The seat rails angle toward the inside. Therefore I put the
inside in the back hole and the outside in the front hole.
This angles the seat back toward the outside and a little
straighter. Just my opinion.

Another Dean
Dean T.



On Feb 27, 2014, at 10:00 AM, Dean Mericas wrote:

> I had some upholstery work done on the seats in my TR4, and I have a
question about how the seats should be installed.
>
> There are two mounting holes at either front corner of the seat frames. A
bolt goes through one of these two holes and into a matching bracket on each
front corner of the seat rails.  My question is: which of the two holes is the
correct location for the pivot bolts?
>
> Thanks.
>
> Dean Mericas
> 1965 TR4 / 1974 Alfa 2000GTV / 1976 Alfa Giulia Super 2L
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tr3a58@verizon.net