[TR] Valve Adjustment Nuts

[Bob Labuz]

Terry,

Something is wrong. All the nuts on my 3, 4 and 6 are 1/2". I use the 
box end of my stock 1/2" Craftman wrench since the dawn of time. And I 
am pretty sure the thread size is BSF 24 TPI.

Bob

On 04/11/2014 06:41 PM, terryrs at comcast.net wrote:
> The adjustment nuts on the valves seem odd sized.  They're too small for a 1/2 inch wrench, but don't fit metric either.  Using the 1/2 inch wrench, I constantly bugger the points on the nuts over time.
>
> What am I missing?
>
> Terry Smith, '59 TR3A
> New Hampshire