[TR] TR3 starters

Andrew Uprichard auprichard at uprichard.net
Wed Apr 2 12:52:06 MDT 2014

Thanks, bob - and to all who replied off-line.  All squared up.


-----Original Message-----
From: Kinderlehrer [mailto:kinderlehrer at comcast.net] 
Sent: Wednesday, April 02, 2014 1:18 PM
To: 'Andrew Uprichard'; triumphs at autox.team.net
Subject: RE: [TR] TR3 starters

There are high torque starters available for the early bellhousing/flywheel
configuration. But this configuration existed well into the TR3A production,
don't know the exact cutover, but my TR3A, serial number 57201L had the
early bullet nose starter.

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Andrew Uprichard
Sent: Wednesday, April 02, 2014 9:56 AM
To: triumphs at autox.team.net
Subject: [TR] TR3 starters

I realize the TR3A starter will not work with a small-mouth gearbox (unless
you make a hole in the casing), but is there any reason to believe one
cannot use a modern, hi-torq starter with the early gearbox?

Andrew Uprichard

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

More information about the Triumphs mailing list