[TR] Head Question

[James Henningsen]

Many thanks to those that responded.  Jim henningsen

 

From: John Macartney [mailto:flywheelcoventry1 at yahoo.co.uk] 
Sent: Friday, November 15, 2013 11:58 AM
To: James Henningsen; triumphs at autox.team.net
Subject: Re: [TR] Head Question

 

Factory used a normal lightweight general purpose grease lightly smeared
with a finger on the block face, both sides of the gasket and the underside
of the head.



 

Jonmac





From: James Henningsen <trguy75 at gmail.com>
To: triumphs at autox.team.net 
Sent: Friday, 15 November 2013, 15:14
Subject: [TR] Head Question


Ok, this is probably a dumb question, but better safe than sorry.  Do you
use any gasket sealant when installing a new copper head gasket on a TR4
motor?

Thanks,

Jim Henningsen

Ocala FL 

62 TR4

75 TR6

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/flywheelcoventry1@yahoo.co.uk