[TR] Head Question

[John Macartney]

Factory used a normal lightweight general purpose grease lightly smeared with
a finger on the block face, both sides of the gasket and the underside of the
head.


Jonmac

From: James Henningsen <trguy75 at gmail.com>
>To:
triumphs at autox.team.net 
>Sent: Friday, 15 November 2013, 15:14
>Subject: [TR]
Head Question
>
>
>Ok, this is probably a dumb question, but better safe than
sorry.  Do you
>use any gasket sealant when installing a new copper head
gasket on a TR4
>motor?
>
>Thanks,
>
>Jim Henningsen
>
>Ocala FL 
>
>62 TR4
>
>75 TR6
>
>** triumphs at autox.team.net **
>
>Donate:
http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums:
http://www.team.net/forums
>Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/flywheelcoventry1@yahoo.co.uk