[TR] TR6 Valve Stem Seals.

Dave Connitt dconnitt at fuse.net
Wed May 29 09:18:42 MDT 2013


Ashley,
The answer is yes..
That is if you can find one of the little gizmos that screws into the spark 
plug hole with an air chuck on the other end. You also need a air 
compressor. I have used one in the past.. many, many years ago. As I 
remember, it worked pretty well. You might be able to make one using an old 
spark plug and a air hose fitting but that would take a welder or brazing 
outfit. See how the tools keep piling up?
Dave Connitt
'67 TR4A IRS
Almost running after 13 years
http://home.fuse.net/davest4A


----- Original Message ----- 
From: "ashleys" <ashleys at farmside.co.nz>
To: <triumphs at autox.team.net>
Sent: Wednesday, May 29, 2013 4:45 AM
Subject: [TR] TR6 Valve Stem Seals.


> Hi! I need to fit AEK113 oil seals to my TR6 Head. Can this be done with 
> the
> head still fitted on block by compressed air to hold up valve for removal 
> of
> cap and collets.
> I am sure with roller rockers with the wide arm oil is flooding the top of 
> the
> collar and getting passed the collets.
> If the air not suitable what other trick one can do.
>
> Thanks
> ashley
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net 


More information about the Triumphs mailing list