[TR] TR4A Torque values needed

[Jerry Van Vlack]

I cannot find any information in my TR4A manuals for the bolt torque values
for 2 locations. Probably the same as for a TR6 but I donbt have that
manual.

1. The lower A Arm to A Arm Brackets that attach to the frame.

2. The A-Arm through bolt to trunnion location. Or does this get assembled
like the older TR 3 and 4 system by tightening to 5 ft. pounds and then
backing off a few flats and inserting the cotter pin?

Thanks,

JVV