[TR] TR6 carb neadles
McGaheyRx at aol.com
McGaheyRx at aol.com
Mon Mar 11 10:58:19 MDT 2013
In a message dated 3/11/2013 12:40:40 P.M. Eastern Daylight Time,
yellowtr3 at yahoo.com writes:
first frustration is buying a "rebuild kit" that contains
only 1/2 the parts you need to rebuild! got new jets but no new needle.
what
the heck?
I have never seen a ZS rebuild kit that came with jets or needles - it
would be unusual to need needles, and even more unusual to need jets. the jets
on a 73 have to be pressed out.
second.
how do you get the needle out?
and the needle was wobbly. you could push it
sideways a little. is that normal?
yes, that is normal. to get the needle out, first you will need to screw
the adjusting screw all the way out of the needle carrier (from above with a
ZS adjustment tool) - then remove that grub screw and pull the needle out.
..
also we could pull the needle down and it would pop back in like its on a
spring. is that normal?
yes, that is normal
Cheers,
Jack Mc
More information about the Triumphs
mailing list