[TR] TR4 Throw Out Bearing Sleeve

[James Henningsen]

It does have a curved face and judging by measurements other gave me, this
is a TR4a-6 sleeve. Thanks, Jim Henningsen

-----Original Message-----
From: Randall [mailto:tr3driver at ca.rr.com] 
Sent: Monday, June 03, 2013 7:25 AM
To: 'James Henningsen'; triumphs at autox.team.net
Subject: RE: [TR] TR4 Throw Out Bearing Sleeve

> Is there an easy way to verify if this is a TR4 sleeve as it might be 
> used one from my TR6.

Which bearing is installed?  If it has the curved face used on TR4A-TR6,
then most likely you have a sleeve for TR4A-TR6.

Randall