[TR] Tr3 temp gage

[Carl TR]

You might try a different tach cable.  Could be binding.  In a pinch you
could temporarily use the speedo cable - same fittings - to test it,  If it
still screams at you - then in the instrument itself.

Unless to you switch to a TR4 setup (electric) it is probably beyond most
DIYs ability.   

Carl
1961 Triumph TR3A - TS81802LO
http://mysite.verizon.net/cfmtr3a/ 
Tampa, FL

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of dave at ranteer.com
Sent: Friday, May 31, 2013 4:30 PM
To: triumphs at autox.team.net
Subject: [TR] Tr3 temp gage

Late tr3.  Have not had the car long.  Finally running and driving today.
Looks like all the gages except tach and temp are finally working.   Tach
screams; its probably bad.  Temp gage is lifeless.   Other than confirming
its
lack of response by puting the sensor in hot water, is there anything else I
can do?  I guess I have to send the gage and tube out?  Any other options?

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net