[TR] TR4A windshield installation

[Keith Stewart]

On Sun, 7 Jul 2013, at 09:56 PAM, Geo Hahn wrote:

>
> One suggestion on that plastic trim -- you might want to leave it long by a
> couple of inches as, in my experience, it will shrink quite a bit later.
>
> The last time I did mine I left about two inches overlap and drove with it
> like that for a year.  Only then did I cut it to exact fit and install the
> little trim piece over it.  Since then it has continued to shrink and the
> gap is now large enough that the trim piece barely covers it.  Does that
> stuff ever stop shrinking?
>
For that reason, TRF has had those closing clips manufactured in three sizes.
When, not if, it shrinks, you can slide on a larger clip.

Keith Stewart
keithstewartATexeculinkDOTcom