[TR] Clutch Fork Pin

[Geo Hahn]

On Sat, Jul 6, 2013 at 3:03 PM, James Henningsen <trguy75 at gmail.com> wrote:

> I have a new clutch fork and hardened pin from Moss.  How tight do I
> tighten
> this pin into the fork?  Is there a torque setting?  Should any threads be
> showing?  I didn't really want to have the cross shaft and fork drilled for
> the bolt upgrade as I don't have a drill press...



Since it gets safety wired I didn't give much thought to torque, just
snugged it up.  I use an electric hand drill for the hole for the
additional bolt -- pretty easy, material not hardened and access is good.

Geo