[TR] TR3 upholstery question

[Dave1massey at cs.com]

OK, great.  I'm not way off base (for a change).  Thanks.  BTW, I forgot 
about the tack strips at the B pillar.  Mine are wood (57 TR3) but may not be 
original - not that much at all on this car is.

Dave

In a message dated 7/1/2013 8:12:51 AM Central Daylight Time, 
wbeech at flash.net writes: 
> Like you said, on the "A" pillar use some contact cement then the side 
> panel covers the tab.  On the "B" pillar you can tack it onto that strip that 
> looks like wadded paper, then it also gets covered with the rear side 
> panel.  To finish it at the top, cut the rubber tube a little short and tuck 
> the fabric inside.