[TR] TR engine block

[Wbeech]

I am sure someone will have a more exotic solution, but I would drill it an
use an easy-out.  Typically, studs are not supposed to be torqued very
tightly.

Good luck,
Bill


 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of David B. Hammond
Sent: Monday, January 28, 2013 10:25 PM
To: 'list Triumph'
Subject: [TR] TR engine block

Just pulled the head only to discover a broken stud midway on pass side.
Broke about 1" below top of block. Amy ideas on getting it out?
David

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net