[TR] Causes of fast idle TR3

[Bob Labuz]

Bill,

That would be my first guess. Best way to do this is to just back off 
the adjustments, disconnect the linkage and re-tighten. Take the air 
filters off so you can insure the butterflies are parked. Recheck after 
tightening the linkage.

Another reason, could be a vacuum leak.

Bob

On 01/02/2013 01:20 PM, WBEECH wrote:
> I'm wondering if the butterfly alignment could be a little out of line.
> Thinking of pulling them off and loosen & re-tightening them.
>
> Bill
>
> Sent from mobile Bill