[TR] TR3A OD switch question

[greg at gelhar.com]

It would make sense to me that the driver be able to read the script. The
switch has three teminals inside and can be wired for "ON" in the down
position for either mounting, but the dash has a "D" shaped hole with a
flat on the bottom that might make the decision for you.

Greg G.
Osseo, MN



> Finally getting around to putting in the OD switch. I must have 20-25
> pictures with the switch visible but none that show whether the 'script'
> faces the driver or the outside.  Did the normal search of the internet
> and found images of both and references to both (as well as the question
> of whether it is up off or on.
>
> The toggle location is on the opposite half of the switch which means that
> if the script is facing inward, the toggle is on the outer half.
> Is it just a matter of personal taste?
>
> Thanks
>
> Carl
> 1961 TR3A - TS81802LO
> mysite.verizon.net/cfmtr3a
> Tampa, Florida
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/greg@gelhar.com