[TR] TR3 Tonneau Cover

[Darrell Floyd]

Dave,
Dum question but normally when purchasing a tonneau,boot cover or top etc. the
snaps are not installed so one can adjust the fit to one's car by installing
the snaps where they required to be.     I just did that procedure on a new
TR8 boot cover since my very nice original was eatin by a bunch of rouge
mices.
Darrell


Sent from my iPad

On Aug 18, 2013, at 7:14 PM, Dave Massey <dave1massey at cs.com> wrote:ru

> Fore/aft.  I haven't checked the port/starboard fit.
>
>
>
>
> Dave Massey
>
>
>
>
>
>
> -----Original Message-----
> From: tom white <tswhitez123 at hotmail.com>
> To: Dave Massey <dave1massey at cs.com>; triumphs <triumphs at autox.team.net>
> Sent: Sun, Aug 18, 2013 10:38 am
> Subject: RE: [TR] TR3 Tonneau Cover
>
>
>
> " no matter how I try to stretch
> it out it comes up a good half inch too short."
>
>
>
> Too short in which direction?
>
>
>
> Best regards,
> Tom
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tr250driver@aol.com