[TR] TR6 Accelerator shaft bushings

[Andrew Uprichard]

Reminds me of the three little rubber pieces which support the wiper motor
on the TR3.  Not sure that I've ever managed to put them in without slicing
them first.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of glemon at neb.rr.com
Sent: Monday, April 15, 2013 9:21 PM
To: triumphs at autox.team.net
Subject: Re: [TR] TR6 Accelerator shaft bushings

Good to know there is a commercially available product that works for the
bushings.  I tried the ones from the Roadster Factory and no combination of
warming it to make it soft lubrication force and finally some trimming could
get them in.  I am by no means the best mechanic but am pretty dogged and
persistent. I gave up and spent much less time fabricating a couple washers
welded to some steel tube.  Has worked fine for a couple years.  Greg Lemon

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net