[TR] Clutch movement

[Dave1massey at cs.com]

What car?  The TR6 is notorious for clutch engagement.  Changing clutch 
cross shaft lever holes can help.  A larger diameter master cylinder or a 
smaller slave cylinder diameter can also help.

Dave

In a message dated 10/6/2012 9:15:46 PM Central Daylight Time, 
fishplate at charter.net writes: 
> Got my clutch problems sorted out, now everything is new except the 
> upper pipe...No air left when I bleed, etc.
> 
> So I'm curious:  How much should the pushrod move when I press the 
> pedal?  The car changes gear OK, but I feel that I'm right on the edge 
> of it not working....and it doesnt' look like it moves much more than a 
> half-inch or so.