[TR] need 2 TR4 door pull handle spire nuts
Bob
75tr6 at tr6.danielsonfamily.org
Thu Nov 15 16:32:07 MST 2012
When I made the interior panels for my TR6, I opted for the TR4 door
pulls.......... much classier. The old TR6 center door pull used a plastic
square nut (Moss#226-030) that fit perfectly into the holes in the door for
the TR4 door pulls. About 1/2 way down this page
(http://tr6.danielsonfamily.org/InteriorPanelInstall3.htm) you'll see what
they look like and how they fit.
Bob
Bob Danielson
http://tr6.danielsonfamily.org/
1975 TR6 modified with:
-Throttle Body Injection
-Toyota 5 Speed
-Nissan Differential
-AAW Wire Harness
-CVJs... and more
-----Original Message-----
From: J.C. Hassall
Sent: Thursday, November 15, 2012 5:18 PM
To: Triumphs
Subject: [TR] need 2 TR4 door pull handle spire nuts
Folks,
My '63 TR4 lacks 2 spire nuts which secure the door pull handles.
Here's the wrinkle: the holes measure 0.25 square, not 3/8" (yes, they
were made that way, not a DPO issue). Moss' spire nuts measure 3/8" and
TRF no longer has a supplier.
Anyone out there in Triumph land have a pair to spare?
TIA
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/75tr6@tr6.danielsonfamily.org
More information about the Triumphs
mailing list