[TR] Replacing clutch master in a TR4

[Geo Hahn]

Dean --

I recall no difficulty in R&Ring the M/C with the pedal box *in situ*.  You
may need to get creative with the wrenches (1/4" drive, short extension,
wobble extension or u-joint) to get at that lower bolt but nothing new in
that.  TR3s were easier as they had a 'back door'.

When reinstalling I find it easier if very I loosely attach the mounting
bolts then attach the hard line while I still have some wiggle room to line
up the threads of the fitting.

Geo


On Fri, Nov 2, 2012 at 7:15 AM, <dmericas at austin.rr.com> wrote:

> I need to replace the clutch MC in my TR4.  I seem to recall doing this
> job long ago without taking out the pedal box as the shop manual suggests
> is required.