[TR] Installing TR3 Interior

D&B Lambert blambert at socal.rr.com
Sun Mar 11 14:36:28 MDT 2012


After doing a couple of TR3 interiors per the "book", next time I am going
with the method espoused by Macy's Garage for the arches . (If there is a
next time, of course).
http://www.macysgarage.com/myweb6/wheel_arch_covers.htm

Dennis

NFI of course.

> I am installing a new interior on aTR3. The panels are pretty straight
> forward, but no so with the rear wheel arches. The kit I bought has
> some synthetic horse-hair like padding that appears to be cut in a
> shape that suggests its use over the top and sides of the arches. Any
> suggestions or hints as to how this goes together? In particular,
> should I be using contact cement or spray adhesive to affix the pad to
> the arch, and what about the vinyl to the padding? Also, how thick
> should the padding be, (the stuff I have is about an inch thick) and
> how compressed by the top covering?


More information about the Triumphs mailing list