[TR] Moss TR6 Fuel Pump Reproduction

[Randall]

> The Moss pump has the same larger size on both the inlet and 
> outlet. 

I don't know if this applies to the TR6 pump or not; but on the TR3A-4A the
pump inlet and outlet fittings were the same size but the lines were
different sizes. (5/16" inlet, 1/4" outlet).  This magic was accomplished
with a special fitting nut, that screwed into the 5/16" port but took a 1/4"
line and compression sleeve.

The TR6 pump isn't quite the same, but it looks similar enough that I'll bet
it used the same setup.

-- Randall