[TR] Fw: moss stainless dual exhaust tr6

[Frank Fisher]

upon further inspection we found the solution to the low hanging tr6 exhaust.
seems to have been operator error!!!
now that we have it fitted properly i
have to say its a nice piece of kit.
looks good and sounds better.
Frank
From: "Dave1massey at cs.com" <Dave1massey at cs.com>
To: triumphs at autox.team.net
Sent: Sunday, June 3, 2012 9:58 AM
Subject: Re: [TR] Fw: moss stainless dual
exhaust tr6

I just installed one myself back in March.  I found the fit was
OK  but a 
bit fiddly.  I do have some rubbing but you can hardly hear it over
the 
exhaust note.

Yes, they do hang low in the back but I have some rather
tall springs on my 
car so I clear most obsticles.  If you are running a
lowered suspension I'd 
recommend you reconsider.

Dave

In a message dated
6/3/2012 11:27:33 AM Central Daylight Time, 
yellowtr3 at yahoo.com writes: 
>
helped a friend install his nice new stainless sports exhaust on his
> 1973
TR6. moss #860-270 
> 
> any one else fitted one of these?
> how did it fit?
>
what problems did you have and how did you overcome?
> 
> we had a heck of a
time
> getting them to come close and now they hang really low just before the
> back
> suspension. like 3" off the ground.
> 
> we have the parts marked
right on the
> right. triple checked

** triumphs at autox.team.net **

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com