[TR] Number plate fixings

[Carl TR]

I haven't seen any responses on this so I'll throw out "one man's opinion"
OMOl...
Whatever you feel like...  or if you are into cosmetics - whatever you think
looks good.

I am not being flippant.  I would imagine that dealers in the fifties just
used a steel bolt/nut;  nylon was available and chrome could be purchased at
the local hardware store.   If I were to mount a front plate (not needed
here in Florida) I would probably go for chrome and a thin chrome frame
around it.  In the back - probably a chrome or black frame and the nylon
type with a thick rubber washer between plate and paint (not to mar the
paint).  

Just my two cents worth...
Carl
1961 Triumph TR3A - TS81802LO
http://mysite.verizon.net/cfmtr3a/ 
Still being restored - but 2012 looks like the year..


-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Thursday, January 12, 2012 5:49 AM
To: triumphs at autox.team.net
Subject: [TR] Number plate fixings

Morning all (or afternoon) what is the standard approach for fixing
registration number plates to the early TR's, I don't see many people using
chrome bolts in any of the images in my books, would the nylon type be
acceptable, I know there may be a difference either side of the pond on this
one, but thought I'd ask Regards John

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net