[TR] TR3 Oil Pressure Gauge Line Path

[Carl TR]

With a heater installed - what is the path of the Oil Pressure Line from the
firewall to the gauge.  Seems to me that the heater bracket is right in line
with its path.  Should it go above it (which would require a slight bend up
and back down to line up with the gauge); around to the driver's side (with
the bend out and back - perhaps not possible - too long); or between the
bracket and the top plate of the heater (which would align ok but would
create a nightmare for r/r of the heater.

Thanks
Carl
1961 Triumph TR3A - TS81802LO 
http://mysite.verizon.net/cfmtr3a/ 
getting closer.  2012 is the year!