[TR] TR6 Clutch Hydraulics

[Bob Labuz]

Dave,

While I was out for a ride today, I thought of another possible cause to 
the hard push on the TR6 clutch.

Problem may be that the transmission was not aligned with the engine 
when installed.

You must make sure the 2 larger bolts are installed first before 
installing the rest of the bolts to the transmission. If I remember 
correctly they are on the left and right sides respectively. On some 
engines,  they might be a stud. But on mine they were bolts. This is 
very important. The clutch may be binding against the fly wheel if the 
alignment is off.

Bob