[TR] TR2/3 fuel shut-off valve.

[Wbeech@flash.net]

Mine has been in place for three years now, no leaks. Got the cork seal from Moss, but I have heard of others using neoprene alternatives.  Biggest problem I have is forgetting to turn it back on and ending up on the side of the road 1/2 mile from home. 

Sent from mobile Bill

On May 26, 2011, at 11:27 AM, Angelo Graham <agraham at execulink.com> wrote:

> Hello List:
> Good to be back on the list after a few months absence.
> Reworking my fuel lines to accommodate an electric fuel pump and have come up against the fuel shut-off valve. The valve needs a new 'cork' and wondering if anyone makes the cylindrical type of cork seal for these valves? What about using a neoprene seal instead - tubing perhaps?
> Finally, wondering about the wisdom of leaving the valve in place; can easily by-pass it with tubing. A potential trouble spot - leaks and the like. Nice shiny brass, though.
> Thanks.
> Angelo Graham
> 
> triumphs at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
> 
> 
> 
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> 
> http://www.team.net/archive