[TR] Triumphs Digest, Vol 5, Issue 96
John Herrera
jrherrera90 at hotmail.com
Fri Mar 18 14:30:55 MST 2011
Or if you don't hold it perfectly straight!
I have experimented with this.
John H.
> Then bend the reamer and use it. The eccentric movement will cut a larger
> hole.
>
> I'm sure that's not the solution you wanted :)
>
> Cliff
> > My concern with modifying the reamer by hand is that you could make the
> > reamer cut oversize,
>
> That would actually be a very useful trick sometimes. If anyone figures out
> how to make a reamer cut larger by grinding metal away from it, please let
> me know!
>
> -- Randall
More information about the Triumphs
mailing list