[TR] Scuttle vent drain tubes.

[Dave Connitt]

Hi List,
It took me awhile to find this website again but there is a really nice application of a Ford Mustang "quarter panel plug" that a guy used when restoring his TR6 to vent the scuttle out the front of the metal baffle that goes between the outer fender and the inner fender. I have seen other attempts at routing that little rubber hose thru a hole cut into the sill but this is really slick and not that expensive. If you go to the link below and scroll down a little past halfway, you will see a picture of the Mustang part in the package and the next picture shows the drain plugs installed. Very slick..


http://www.74tr6.com/repainting.htm


There is a lot of other nice improvements detailed on this website but I thought I would pass along this nice scuttle vent idea.

Dave Connitt