[TR] TR2/3 control head installation.

[wbeech at flash.net]

Angelo,
Is the olive and locking nut tight at the other end?  Mine moves around
until everything is tight at both ends, but then again, maybe I have done
something wrong too.

BTW, are the one-piece steering shaft control heads supposed to self-cancel?
Mine never has and I have always thought it just wasn't a feature then.

Bill
TS-30766

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Angelo Graham
Sent: Wednesday, June 29, 2011 5:48 PM
To: triumphs at autox.team.net
Subject: [TR] TR2/3 control head installation.

Hello List:
Have moved back to try to deal with the installation of the control 
head. Got some new grub screws from TRF to help matters, but they are 
not as 'pointed' as the original TR versions. With the control head in 
place and following the manual instructions, can't seem to get the 
control head to stay put. The screws appear to be 'home', but the 
control head is still pretty easy to turn in the hub. Needless to say, 
it does not self-cancel.
Not sure what I am doing wrong here (once again!!). Anyone been there? 
Should I look for pointed grub screws to really grab the back plate of 
the control head? Am I missing something in the installation procedure?
Thanks for any help with this.
Angelo Graham


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net