[TR] TR6 body gap at driver's door

[Andrew Uprichard]

My 250 had a similar problem and shimming worked better than I could have
hoped for.  Regarding whether or not to keep looking, I guess it is all down
to how much you are prepared to spend.  I'd rather have a gap on a rust-free
car which drives and handles well than have a trailer queen.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of
thenicholls at verizon.net
Sent: Monday, June 20, 2011 5:16 PM
To: areich at telus.net
Cc: triumphs at autox.team.net
Subject: Re: [TR] TR6 body gap at driver's door

If it was me, I would keep looking.

Craig 
1972 Triumph TR6


Jun 20, 2011 04:00:54 PM, areich at telus.net wrote:

I am looking for a TR6 and came across one with quite a gap at the rear 
side of the driver door where it meets the back of the body. The door 
closed OK, but it didn't look good.
The fellow said he had talked to a body shop and they said they could 
detach the tub at the back and shim up the body to fix the gap.
Any thoughts on that?

Allan Reich
Triumph-less in Vancouver (sold my TR3A)


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/thenicholls@verizon.net


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net