[TR] Interior vinyl installation question

[Joe Curry]

A blow dryer is a big help.  Heat the material as you stretch it during
application.  That is the best I can recommend.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Carl TR
Sent: Saturday, June 04, 2011 8:07 AM
To: TR List 
Subject: [TR] Interior vinyl installation question

What is the consensus of the list about getting the wrinkles out of vinyl
before installation.

The vinyl has several 'in' and 'out' wrinkles where it was folded.   I tried
letting them sit in the Florida sun/heat yesterday but it had very little
effect.   Will they come out as I apply glue and stretch on the dash/cubby
door/capping pieces?  

Or do I try to steam them or iron them or something else such as wetting
them down before the sun/heat?

Thank you
Carl


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/spitlist@cox.net



Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive