[TR] interior insulation - TR3

[Jeff]

On 6/30/2011 8:42 AM, Cosmo Kramer wrote:
> I'm wondering if that's MY PROBLEM of getting 'vapor lock' when on long drives
> in 90^ temperatures, because of the Fan Shroud that I fabricated to have
> better
> than 90% of the outside air forced through the radiator&  not escaping
> around
> it.
> Thus restricting 'air flow' to the rest of the engine bay?

Speaking of catching up...

Get some dryer duct tubing and make a guide to vent some air from the 
shroud to the carburetter bowls.  Then drive somewhere where it's hot.  
Go inside, have a 15-minute beer.  Then come back out and see if it starts.

Jeff Scarbrough
Corrosion Acres, Ga.