[TR] TR6 Pedal Box assembly

[Jerry Van Vlack]

I'm re-assembling a TR6 Brake and Clutch Pedal Box and I didn't write down how the return springs attach and where they attach. On the Brake side there is a flange bent up from the box with a hole in it between the pedal arm and where ever the other end of the spring attaches. Does the return spring go through this hole? It seems that's the only way it can assemble, I thought I'd ask. Also I have 1 long spring and 2 shorter springs. Again for the Brake Pedal it looks like the longer spring has one end obviously going to the pedal arm but does the other end hook around the edge of the pedal box. It's the only spring with one long end that can go thru the hole in the flange without interference. How do the other 2 springs then attach to the Clutch Pedal?

Can someone stand on their head and take a photo under the dash of how the springs attach? That may be the easiest at this point. 

Thanks,

JVV