[TR] [6pack] wiring question

[Andrew Uprichard]

Thanks for the feedback.  The general consensus is that the green feeds the
fan motor.  You guys are great - Marry Christmas!

Andrew

 

  _____  

From: Dale [mailto:tpdwinch at yahoo.com] 
Sent: Sunday, December 11, 2011 7:44 AM
To: Andrew Uprichard; triumphs at autox.team.net; 6pack at autox.team.net
Subject: Re: [6pack] wiring question

 

Andrew

 

In Dan Master's book, for TR 250's and early TR-6's, there is no green wire
going to the ignition switch. Are you sure that a PO did not place this
there or that is not a lead going to the fan motor?

 

Dale 

 

From: Andrew Uprichard <auprichard at uprichard.net>
To: triumphs at autox.team.net; 6pack at autox.team.net 
Sent: Friday, December 9, 2011 4:01 PM
Subject: [6pack] wiring question

I am wiring the ignition on my 250 and have located the corresponding
section of the harness.  As expected, there is a brown (live) two whites
(ignition) and a white/red (starter).  But there is also a green:  does
anyone know why this is so?  I thought green was equivalent to a post-fuse
white, i.e., those things like lights and turn signals which operate with
the ignition on.



Thanks in advance for any advice.



Andrew Uprichard

________________________________________

6pack at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/6pack/tpdwinch@yahoo.com