[TR] TR 3 parts

[spook01@comcast.net]

Hi guys,
No monetary interest but Jeff at Kell6300 at gmail.com 
has quite a bit of TR3 bits for sale including good rear fenders and a left front fender. 
Need something, drop him a line.   He's in the Carolinas I think.

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Bob Labuz" <yellowtr at adelphia.net>
To: <cfmtr3a at verizon.net>
Cc: <triumphs at autox.team.net>
Subject: [TR] Installing wiper rack and wheelboxes
Date: Mon, Dec 5, 2011 13:59


Carl,

It has been so long since I did the 3 I cant remember but on the 4 and 6, you cannot put it all together first and then install it.

On the 4 and 6 you have to do it by sections working with the inspection covers off to gain access to both wheel boxes. Real PITA on both 4 and 6. Messy since everything is greased. Lots of colorful language was heard in the garage during installation.

No measurements available sorry.

Bob

On 12/05/2011 01:25 PM, Carl TR wrote:
> Project is moving along - slowly oh so slowly..
>
> What is the best way to install the Wiper Rack and Wheel boxes on a TR3A?
> Are there any BTDT issues.
>
> 1)	Put it all together first (including grease), or
> 2)	Install in sections. - Install the tubing and boxes then the rack
> (Grease as I go)
> 3)	Demister vents installed or out (they are in but if it will make it
> a lot easier - not a biggie to take them back out).
> 4)	I have the tubing from several - There are slight variations in the
> lengths.  I can figure out the center and short end but does anyone have the
> measurement for the curved one - from wiper motor connection to the box?
>
> Thanks
> Carl


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spook01@comcast.net