[TR] Oil Filter Adapter - Pot. Problem?

thenicholls at verizon.net thenicholls at verizon.net
Wed Aug 24 17:34:30 MDT 2011


Always worked for me.

Craig
1972 Triumph TR6


Aug 24, 2011 06:23:48 PM, terryrs at comcast.net wrote:

>I had a similar problem with mine. I made my own adapter and found that the 
>first time I tried to remove the filter the entire adapter spun because the 
>spin-on filter gasket stuck to the adapter the same as it does on a "normal" 
car. When the adapter spun, so did the adapter bolt. 

Just curious and so a general question. I'd always believed that when installing a fresh filter cartridge, one used some of the old oil to lubricate the rubber o-ring sealer, then tightening just one full turn, maybe turn and a half. Might not doing this account for the behavior we've seen posted? Dunno, just asking....

Terry Smith, '59 TR3A
New Hampshire


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/thenicholls@verizon.net


More information about the Triumphs mailing list